

EZIVac
Hazmat overloading and overfilling will not be a danger in the workplace when you have the EZIVac Pumps. Exclusively available in the USA through NorthEast Hazmat Inc., these pumps make complex hazmat handling jobs quick, safe, and easy.
Technical Specifications
EZIVac (Vacuum In and Pump Out)
Your compressor needs to have a free air delivery capacity of:
Minimum of 18 CFM @ 100 PSI
For Best Performance: 25 CFM @ 100 PSI
The Reversa function may not work correctly if the flow rate is less than 17 CFM. Depending on the brand, this is usually a compressor with at least 5.5hp.
You will be able to vacuum
up to:
28 GPM (105 LPM)
With a vertical suction lift
of up to:
8.2 ft. (2.5 M)
You will be able to pump
out up to:
13 GPM (50 LPM)
With a vertical pumping
lift of up to:
6.5 ft. (2.0 M)
The maximum vacuum within the drum will be up to:
-35.5 kPa (-10.5 inHg)
With a vertical pumping lift of up to:
17.2 kPa (5 inHg)
These values were measured using water and standard kits. Note that actual performance may vary depending on the fluid which is being collected, vertical lift, and the length and diameter of the hose being used.